Specifications
1650 Series Replacement Teeth | ||||||
---|---|---|---|---|---|---|
Part No. | Code | Description | Application | Install in head | Install in P-35 Pilot Bit | |
1650 | 140070 | Dirt | Ordinary digging | All Pockets | Yes | 0.5 |
1650-HF | 140071 | Hardfaced 1-sided | Abrasive Soil impact | All Pockets, HF-up | Yes, HF-up | 0.5 |
1656 | 140400 | Tungsten Carbide (round) | High abrasion, frozen soil, low impact | All Pockets | Yes | 0.7 |
1654 | 140406 | Tungsten carbide (flat) | 0.6 | |||
1851 | 140080 | Bident (comb. dirt/chisel-point) | Dirt | All Pocket, rib up | Yes, rib up | 0.6 |
1652 | 140085 | Gage Tooth | Dirt | Outside Pockets only flange out | Two outer packets only, flange out | 0.5 |
1658 | 140417 | Carbide gage | Highly abrasive soil, frozen ground | 0.7 | ||
Ribd Rubr-Lok | 137601 | 4' length | Use for installing teeth. See instructions | 0.1 | ||
SH-85 | 137735 | Soft Steel Hammer | 1.9 | |||
1225 | 137750 | Drift Punch | For removing worn teeth. See Instructions | 0.4 |
Tooth Holders | |||||
---|---|---|---|---|---|
Part No. | Code No. | Dimensions | Approx WT KG | ||
A | B (mm) | C (mm) | |||
WT-50 | 158115 | 25 | 127 | 47.62 | 1.1 |
BT-100 | 157010 | 95.25 | 63.5 |